Ormus

Ormus is the scientific name for Monatomic Elements. Ormus is also known as the white powder of gold. It is also known as the philosopher’s stone and the elixir of life. It is found nested in the molecules of water. Ormus is derived from ORME which means the tree of life in Hebrew. The Egyptians and other civilizations have been researching Ormus for centuries. The healing properties Ormus has been the object of inspiration of many civilizations.

There are various ways that Ormus helps in prolonging life. This ‘elixir o life’ is said to have super conductivity properties. And it can be ingested and people have been proved to have been healed from many diseases. Ormus is a mixture of many chemicals and elements which also includes many precious elements.

There are many ways that Ormus can be made. There are several ways of producing Ormus either at home or a laboratory. The other ways of making Ormus is called the WET method, the DRY method and the BOILING GOLD method.

These three methods have are methods of creating Ormus only in the lab by constantly measuring the pH value. The pH value is the acid/base ratio of any given solution. The pH value that is less than 7 shows that the acidity of the solution is very high! An example is vinegar. pH 7 is the neutral stage of the pH value of a solution like water. A value that is greater than pH7 means that the solution is high in alkaline content like the pH value of lye.

In the wet method, the Ormus is created by adding a lye solution mixed with water and raising the pH value slowly and then letting it stay overnight to be able to take the sediments and removing all the liquid and then taking the Ormus out of it.

The dry methods, uses mineral powder added to boiling lye water to which a little vinegar is added and filtering all the contents of the solution and then letting it stay overnight. Washing the sediments and then removing the Ormus from it.

The boiling gold method is not a very good way to make Ormus and is not suggested by many scientists because it has never worked properly. In this method gold dust is first boiled in a lye solution and all the solids are filtered out. Distilled whit vinegar is added to the solution to bring down the pH value. After letting it stay overnight the liquid is removed and the sediments are washed and the Ormus is removed.

While making the Ormus there are some simple things that are needed to be kept in mind so that all the readings are recorded precisely without the mixing of other chemicals.

Introduction

In the 70’s David Hudson found some substance on his land on which he was mining gold. He spent the next few years trying to figure out what he can make out of the substance. Ormus comes from the name monatomic element. It has a composition of aluminum, gold, silver and other metals.

There has been a myth that the Egyptians have been trying to create something called as the elixir of life or the philosopher’s stone. The mythic expression for life forever…

Water is said to have two parts of hydrogen and one part of oxygen and another part of another element which people cannot find out. This one element is believed to be Ormus and it hides in the inside of the water molecules, because of the abnormal shape of the water molecules. Here below are the steps on how to make Ormus.

Steps

• Pour out a cup of distilled water into a Pyrex bowl.
• Add two spoons of lye that you can order online
• The mixture can burn into skin or clothing and it is important to be cautious and then pour the contents into a nozzle bottle for easier squirting.
• Add four more cups of water in another bowl and add dead sea salt that you can order online and dissolve
• Strain the salt water mixture through many coffee filters together at one time for a clean filtration
• Use a pH meter to check the level while dropping lye water onto the salt water solution
• Constantly keep checking the pH level. Care should be taken not to let the pH balance to go more than 10.78
• Check at several corners of the water in the bowl to see if the ph is equal everywhere if not , stir and keep checking or adding
• Pour the water into a large jar to settle over night. You will find a grey matter formed at the end. Filter the water away and let the gray matter stay. Add more distilled water to the sediments and again shake the bottle and let it settle for awhile. Keep repeating this process 3 or four times
• Afterward pour the gray sediment into a jar and close tight for use.
• The dehydrated state of this is Ormus powder

Conclusion

Ormus is said to have a lot of healing properties like for incurable diseases like cancer, diabetes and even AIDS. Ormus is said to have a contact between the spiritual world and the physical world. The prepared Ormus can be eaten in small qualities of half a tea spoon a day.

How to make Ormus water

This guide will teach you the basics on how to make Ormus water on your own. With our guidance it we hope that you will achieve your goals. So in this tutorial we will provide you with the appropriate procedures. First, you should know that Ormus water can be made through 3 different methods.

01) Wet Method;

02) Dry Method;

03) Magnetic Dry Method;

We will however only explain the first two because I have not been able to and from my research I don’t know anyone who was able to achieve the ‘Magnetic Dry Method’

As a precaution you should read these; CAUTION!! And WARNING!!

Wet Method

If you are going to make Ormus for the first time, then we suggest you to use this method which will be explained below, this method is suggested for a first timer because it is easy and risk free.

The only thing needed to do is bring the pH level of salt water above 8.5 but no higher than 10.78. You will want to adjust the pH slowly to make sure that you will reach the correct level. For this process you should use”lye” (lye is a strong solution of sodium or potassium hydroxide). At this point you will have some sort of solid form. Once you get the precipitate, it is recommended to leave it out for at least a day. Following the wait period slowly remove the water that is on top of the precipitate. As a result you will have acquired some m-state.

Dry Method

Other than the wet method which was explained above, here is another way in which you can gain similar results using a different scenario to make Ormus water. On the above method, we did the same by increasing the pH Level and now we are going to get the same final result by dropping the pH level. First thing you need to do is fine powder the limestone through grinding it. You should boil the powder with lye (Amount of 1:4), water should cover the powder and lye about 2 inches and it should boil for at least four hours. After boiling for at least four hours you should strain the contents of the pot and keep the liquid, some people recommend coffee filters for this process. Then you will need to bring the pH down (no lower than 8.5). To do this you should stir in HCl (hydrochloric acid). Let it settle for a few more hours. Finally you will get a resulting precipitate and you need to wash it as above description (on wet method).

We thank subtleenergies.com for helping us on our first few times in creating our own Ormus and for some of the information on our pages.