How to make Ormus Water
How to make Ormus water
This guide will teach you the basics on how to make Ormus water on your own. With our guidance it we hope that you will achieve your goals. So in this tutorial we will provide you with the appropriate procedures. First, you should know that Ormus water can be made through 3 different methods.
01) Wet Method;
02) Dry Method;
03) Magnetic Dry Method;
We will however only explain the first two because I have not been able to and from my research I don’t know anyone who was able to achieve the ‘Magnetic Dry Method’
As a precaution you should read these; CAUTION!! And WARNING!!
Wet Method
If you are going to make Ormus for the first time, then we suggest you to use this method which will be explained below, this method is suggested for a first timer because it is easy and risk free.
The only thing needed to do is bring the pH level of salt water above 8.5 but no higher than 10.78. You will want to adjust the pH slowly to make sure that you will reach the correct level. For this process you should use”lye” (lye is a strong solution of sodium or potassium hydroxide). At this point you will have some sort of solid form. Once you get the precipitate, it is recommended to leave it out for at least a day. Following the wait period slowly remove the water that is on top of the precipitate. As a result you will have acquired some m-state.
Dry Method
Other than the wet method which was explained above, here is another way in which you can gain similar results using a different scenario to make Ormus water. On the above method, we did the same by increasing the pH Level and now we 
are going to get the same final result by dropping the pH level. First thing you need to do is fine powder the limestone through grinding it. You should boil the powder with lye (Amount of 1:4), water should cover the powder and lye about 2 inches and it should boil for at least four hours. After boiling for at least four hours you should strain the contents of the pot and keep the liquid, some people recommend coffee filters for this process. Then you will need to bring the pH down (no lower than 8.5). To do this you should stir in HCl (hydrochloric acid). Let it settle for a few more hours. Finally you will get a resulting precipitate and you need to wash it as above description (on wet method).
We thank subtleenergies.com for helping us on our first few times in creating our own Ormus and for some of the information on our pages.
Related posts:
- How to make Ormus Powder Introduction In the 70’s David Hudson found some substance...
- Methods of Ormus Production Ormus is the scientific name for Monatomic Elements. Ormus...
- Ormus water and the wet method Ormus is an m-state monatomic element that has been...
- Sink Trap for Ormus Water Normally the Ormus materials are dissolved in water and...
Related posts brought to you by Yet Another Related Posts Plugin.
